World class sound. Naim Audio, based in Salisbury, England, have been producing the world's finest CD players, amplifiers, loudspeakers, network players and all-in-one systems over the past 35 years.
With this in mind they began a development project to design interconnects and speaker cable that would meet Naim Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Naim Audio Super Lumina range was born.
Designed to maximise the performance of Naim Statement but equally at home in 500 and Classic Series systems, Naim Super Lumina pre to power amp interconnects are available with DIN to XLR and XLR to XLR terminations. Super Lumina source to preamplifier interconnects are available with DIN to DIN, DIN to RCA, RCA to RCA and RCA to XLR connectors.
Naim Super Lumina interconnects are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity.
The fundamental cable design consists of several individually-insulated, multi-strand, silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference. Each signal, return, ground and shield conductor is individually manufactured to suit its specific function.
The Naim Super Lumina interconnects feature an advanced version of Naim’s patented Air-PLUG technology, first developed for the Naim Hi-Line. All DIN and XLR connectors use the Air-PLUG connector, which is designed as a decoupling device to minimise microphonic interference and preserve the integrity of the audio signal.
The new Naim Super Lumina Air-PLUG features multiple individual aluminium rings which form the rear of the connector. These are screwed together to form an articulating section which inhibits the passage of unwanted energy and the choice of aluminium as a material enhances this process. The connector pins on DIN terminated cables also float within their sockets, extending the decoupling effect right to the point where the signal enters the equipment.
Designed to maximise the performance of Naim Statement but equally at home in 500 and Classic Series systems, Naim Audio Super Lumina loudspeaker cables are available with either 4mm or spade connectors.
Naim Audio Super Lumina loudspeaker cables are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity.
The fundamental cable design consists of several individually-insulated, multi-strand, silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference. Each signal, return, ground and shield conductor is individually manufactured for its specific function.
Each Super Lumina cable is hand-assembled by Naim to the customer’s specification of length and termination. The process is intricate and highly-skilled, following detailed instructions which cover every aspect of the build. Every cable also goes through a proprietary de-stressing process to relieve the materials of the inherent stresses which are a result of the manufacturing process. This means the cables reach optimum performance with minimal run-in time.
Something went wrong and we were unable to complete your request.
